Asbestos & Non Asbestos Products

1) ASBESTOS :

i) CLOTH:

asbestos cloth

Fire blankets,fireproof clothing,oven gloves,safety curtains and blankets

ii) TAPE / ROPE / GLAND PACKING:

asbestos tapeasbestos rope

Gland-Packings

 Lagging &Seal Joints in boilers, flues ,chimneys etc. in the past, woven asbestos quilts filled with loose asbestos were sometimes used for insulation of hot water cylinders, calorifeisrs, etc.

Millboards

Mainly used for thermal insulation eg. steam pipes, industrial ovens,sheet metal ductwork in industrial heating systems, cylinder head gaskets, etc.

2) NON-ASBESTOS (CERAMIC FIBRE & GLASS FIBRE):

nonasbestos ceramic non asbestos ceramic gland and rope

Low thermal conductivity, thermal shock resistant, light weight, Excellent sound absorption, no curing or dryout time, lining can be fired to operating temperature immediately, Easy, quick installation and repair, Resists most chemical attack,Unaffected by water & steam, very low heat storage, Asbestos free,Resillient Insulation and sealing applications commonly used acids and alkalis.

Available in Ropes, Tapes Cloth etc.

Jointing Sheets/Gasket Sheets :

(Asbestos & Non-Asbestos)

Found anywhere a fireproof Seal is needed eg.ovens,sections of system built dwellings,sealing holes in service ducts,joints to soil pipes,Boiler Packing.etc

Rubber & Rubber Products

  • Natural
  • Neoprene
  • Silicon
  • Viton
  • EPDM
  • Nitrile
  • Food Grade Rubber –

Available in :

Sheets,Rods,Tube,Electrical Mat,Bellows,Rollers & Machines Components Roofing,Oil Seals,air proof fittings,washers work table and ground contacted with oil & grease,pavement for electronic places and apply to punch the gasket with all kinds of shapes and cover on the mechanical equipments.

3) ASBESTOS PACKING FOR STEAM & SUPER HEATED STEAM:

We manufacture and supply a comprehensive range of high quality asbestos packing products for various requirements. Developments in different industrial fields and areas demand high-tech packings and to fulfill those requirements, we offer innovative and high performance products ensuring top functional reliability. Utilizing our long experience of 25 years and through continuous R&D, we are capable to satisfy various requirements through our quality products.

Our asbestos packings include solutions for steam & super heated steam; oil and solvents, acids, alkalies and chemicals; marine & hydraulic water and oil.

Style No. Champion

Temperature (Centrifugal)

Service Recommendation

1000

350

Asbestos dry plaited general steam and insulation packing for hot gases, oven, autoclaves etc. conforming to IS Specn. 4687 / 1968 / 1980 and DGS & D Specifications.

1100

325

Lubricated and graphited, general-purpose asbestos packing for Glands for medium pressure conditions conforming to IS Specn. 4687 / 1968/ 1980 and DGS & D Specifications.

1200

350

Incorporated with white metal wire for low friction and greater mechanical durability. Suitable for rotary shafts with peripheral speeds upto 1750 ft/ min. Recommended for steam, hot water, weak acids and alkalies.

1300

500

Brass wire reinforced asbestos yarn packing. Specially suited to high speed rotary and reciprocating shafts even at higher temperature and pressure. Incorporation of brass wire improves its strength and anti-friction properties. It is recommended for saturated and super heated steam, hot water, air, gases, oils, steam expansion glands, rotary and reciprocating equipments.

1800

490

Non-metallic asbestos lubricated and graphited packing for high pressure saturated super heated steam conforming to IS Specn. 4687/ 1968/ 1980 and DGS & D Specifications.

1850

490

Same as above, but lubricated non graphited version meant for Stainless Steel Rods.

1900

540

Crysotile white dry asbestos fibre yarn of high purity braided packing non-metallic used where severe high temperature conditions prevail. Best suited for expansion joints, door ovens, caulking of joints, exhaust pipe wrappings, ductings etc.

1910

540

A closely braided high content asbestos yarn packing non-metalic lubricated with special heat resisting dry lubricant. Specially recommended for high pressure super-heated steam services. An excellent soft packing for valve glands, guage glass linings, turbines boilers and similar applications. Please slate when spindle / rod is Stainless Steel

1916

815

Braided from high grade asbestos yarn suitably lubricated and reinforced with stainless steel wire. This is an ideal choice for high temperature valve application and is suitable for service with steam, butane and propane gases, Oil vapour, furnace oil etc. Please slate when spindle/ rod is Stainless Steel

1933

500

A popular packing made tram asbestos fibre yarn reinforced with copper wire and suitable lubricants to withstand high pressure and temperature for steam valve. Please slate when rod / spindle is Stainless Steel

1960

680

A specially developed braided packing for super sealing jobs made from high grade asbestos fibre yarn reinforced with inconel wire and suitably lubricated. It will function most effectively against super sealing jobs on valve stems in power plants and oil refineries A well recommended packing for control valves at high pressures and temperatures and various other applications. Please specify when rod/ spindle is Stainless Steel
  4) ASBESTOS PACKING FOR OIL & SOLVENTS, ACIDS, ALKALIES & CHEMICALS:  
 
Style No.
1500 
tempture
425
Asbestos packing manufactured from high grade asbestos yarn impregnated with oil resisting synthetic compound by a controlled process during which each strand is treated with fine graphite and a special grade of lubricant suited for hot and cold oils, solvents, aromatic hydrocarbons, petroleum distillates and oil refinery services. Please specify when the rod or shaft is aStainless Steel
1513
500
Asbestos-reinforced brass wire packing treated with oil resisting synthetic compound having suitable lubricant. Incorporation of brass wire improves strength and anti-friction properties. Best suited for petrochemical applications under high pressure conditions Please indicate specifically when the rod is Stainless steel
1490
300
Special grade of asbestos Duplex Braided packing suitably lubricated and treated with graphite to withstand caustic liquors, including caustic potash, soda, lime, ammonia and sulphides. An ideal packing for paper mill applications PH 4-12
1094
-150 to +300
High grade asbestos fibre yam Duplex Braided packing impregnated with special PTFE suspensoid for severe caustic and other corrosive chemical, solvents, oils and petroleum byproducts and oxygen service PH 2-12
1603
-150 to +300
A combination packing with specially selected fluoropolymer PTFE fibre and chemical resistant inorganic fibre yarn for resisting against corrosive medium and concentrated acids. This construction improves the strength and chemical inertness of the packing. This combination packing is further treated with PTFE suspensoid. This packing can be used against acids, chlorine, in valves, pumps having chrome plated or stainless steel shafts. PH 2-14
1003
-150 to +300
A combination packing concentrically braided with special compound to resist hot concentrated alkalies, organic and dilute acids. A very special low friction packing recommended to be used with high speed pumps, agitator shafts, oils, solvents, ammonia solution, concentrated caustics and ketones. PH 2-12.
1
-200 to +290
A super fluorocarbon fibre interbraided packing. This packing is developed for pumps, valves, mixers, agitators involving applications for highly corrosive chemicals, oxygen service, acids and alkalies. PH 0-14.
2
-200 to +290
A 100% pure PTFE packing impregnated with a special chemically inert suspensoid A good packing for control valves, pumps handling corrosive gases, ammonia, foodsuffs and pharmaceuticals. It is an ideal packing for sealing dryers, mixers and agitators. Due to high tensile strength of the fibre, this packing is best suited to be used in high pressure valves and reciprocating pump applications. PH 0-14.
3
-200 to +290
A PTFE fibrous packing having special Duplex Braid to increase dimensional stability treated with inert high temperature lubricant. This packing is safe, non-toxic and flexible for use on pumps, for concentrated acids, alkalies, oils, solvents and gases PH 0-14
23
-250 to +300
A Duplex plaited flexible combination packing having super grade fluoropolymer intimately treated with graphite to enhance lubricity and heat dissipation. This packing is self lubricating mechanically strong and widely used in chemicals, petrochemicals, power plants, paper, pulp and food industries. PH 0-14.
36
-240 to +300
A graphite bonded fluoropolymer fibre packing Duplex Braided to improve thermal conductivity and lubricity for maintaining extremely low friction. chemical resistance and reduces maintenance cost. Best suited to valve stems, centrifugal pumps, woodpulp, caustics, oils, solvents, acids and strong chemicals. This packing is widely used in Refineries, Petrochemicals and Fertilizer Industries. PH 0-14
 
 

We offer specially designed asbestos packaging solution for marine & hydraulic water and oil applications. Designed keeping the various marine, hydraulic water and oil packaging requirements in mind, this product is superior in strength, durability and delivers quality results.The different specifications and usage recommendations are given in the table below :

Style No. Champion
Temperature (Centrifugal)
Service recommendation
2222
130
This is a specially developed lubricated non-graphited long vegetable fibre braided packing for marine applications. It has been further lubricated with a low friction dry lubricant to enhance anti-friction property for use in sea water and fresh or river water applications, water wheel shafts or rudder and stern glands.
2224
150
The most critical parts to seal in a ship are the stern tubes and the rudder post. With this view in mind, a most reliable packing is specially developed from non-asbestos tough vegetable fibres. The packing is impregnated with lubricants which protect the packing structure. This packing is therefore most suited for use in marine against sea water in rudder posts and stern tubes, oils, weak alkali solutions and in paper plants.
2300
130
This packing is manufactured from high tensile strength vegetable fibre thoroughly impregnated with a special lubricant and graphite. Suitable for fresh and salt water, pen-stock and heavy duty hydraulic applications.
376
130
A special non-graphited soft natural fibre yarn packing impregnated with first grade lubricant suitable for high speed centrifugal pumps, compressors and refrigerations, D M Water, cooling water and condensate pumps. Owing to the pliable nature of the material used this packing permits free motion of the rod.
374
150
Duplex Braided fine soft vegetable fibre packing self lubricated. Each strand of this packing is specially impregnated with additives alongwith break-in lubricant having the property of self-lubrication and media repelling action This packing is best suited to seal glands of pumps, valves, handling condensates, demineralised water and for cold and hot hydraulic applications.
3116
130
A fine natural fibre braided packing impregnated with lubricants and graphite recommended for use on reciprocating and rotary pumps, valve spindles, refrigeration machinery and compressors. The packing presents a smooth surface that will not score shaft or sleeves because the soft fibre constantly absorbs the liquid being pumped and maintains a soft and pliable running face on the shaft.
600 ‘A’ Steam
280
An asbestos proofed semi-metallic packing with strips of white metal intermittent layers embedded. Used on steam expansion glands, marine engines, compressors, pumps, winches and hoists. A special high pressure medium temperature packing for ships and ship building industry, sugar mills, etc.
143 Metaflex A
560
Aluminium foil, crimpled under mechanical process with high grade lubricants, sealed in layers and folds built around asbestos or non-asbestos rovings. The packing lacks resilence but permits compressibility. Used for high peripheral speeds on rotary crude oil pumps, petroleum distillates, steam compressors, turbines, hot oil valves, brine, hydrocarbons etc. Shafts should be of 500 brinell hardness or over.
146 Metaflex L
300
A soft white metal foil anti-frictional packing similar in construction as above for high peripheral speed. The packing is soft enough to present the shaft with a bearing alloy that reduces scoring. Recommended for fuel and crude oil, fresh or salt water refrigerator pumps, air compressors, abrasives, crystallizing or congealing liquids such as sugar, asphalt and medium temperature slurries. It is also used as anti extrusion rings in combination with regular braided soft packings.
789 C Ammonia
130
A soft flexible laminated proofed fabric packing impregnated with lubricants which reduce friction and shaft wear to a minimum Used extensively in ammonia and refrigerating pumps, compressors and water service.
777 Auto Lip
130
A fine fabric composition precision packing with a lip section for automatic self sealing service on accumulators, press rams, cranes and reciprocating rods under heavy duty hydraulic application.
778 Auto Lip Metallic
130
A packing similar in construction as above but with white metal pegs embedded on rod surface increasing bearing property. Not suited for non-ferrous soft metal rods.
714 Oelit
130
A proofed fabric packing with synthetic compounds to resist service conditions of oils, petroleum distillates, solvents and hydrocarbons.

ASBESTOS JOINING SHEET:

1) CHAMPION 20 STEAM:

1

RED or GRAPHITED

Compressed fibre jointing is a consistently uniform pliable and resilient product. A price worthy quality of dependable performance, plus adaptability to many sealing requirements makes this ‘STEAM JOINTING’ the most popular choice sheet packing of plant engineers and maintenance men.Metallic and Non-Metallic in both finishes. Developed for general purpose applications and this quality is applicable to a wide range of duties with less severe working conditions of temperature and pressure.

2) CHAMPION 20 METALIC:

2

 GRAPHITED BLACK

A compressed Asbestos fibre jointing embedded with a wire gauze insertion supplied with Graphite Finish. Used for general purpose application where condtions of temperature and pressure are not too severe.

3) CHAMPION 54 SUPER:

3

YELLOW / GREY or GRAPHITED

Manfactured from excellent quality of Chrysotile Asbestos Fibre and raw materials, the blend being intimately mixed with heat resisting rubber compounds under special process to ensure maximum stability against high pressure and temperatures.

Though primarily a super heated steam jointing it is also recommended against saturated steam, oxygen, petroleum distillates, oils and fats, fuels, internal combustion engines, hydrocarbons, alcohols, solvent, dyes, etc. It is popularly used in MARINE ENGINES, electricity generating sets etc.

4) CHAMPION 54 SUPER METALIC:

4

GRAPHITED BLACK

A compressed Asbestos fibre jointing embedded with a wire gauze, The super metallic sheet is superior in performance over other forms of jointing sheets where severe physical conditions of high pressure and temperature have to be resisted. It is effectively used under rapidly changing operating conditions of pressure, were vibrations are experienced and where the flange of gasket joint is narrow. Used in diesel exhaust manifold, cylinder head gaskets, internal combustion engines, air compressors.

5) CHAMPION 39 HIGH PRESSURE:

5

BROWN / GREY or GRAPHITED

Manufactured from selected quality of Asbestos Fibre and vulcanized with special rubber compound to meet with the exacting requirements of modern industry. Used for applications against dry and wet steam, water, gases, alkies, oil at normal temperatures, chemicals, fuels etc. and general engineering.

6) CHAMPION 39 HIGH PRESSURE:

6

DARK GREY

A compressed fibre jointing bonded with a sophisticated compound. This is specialised jointing to withstand the most exacting demands of oil and petrochemicals plants, solvents, refrigerators, oils, etc.Used in pipelines and apparatus of petrochemical fields, petroleum distillates, oil and petroleum industries. It is also recommended in industrial processes with high contents of aromatic substances, sulphurous compounds, chloric hydrocarbons, phenols, refrigerants, etc. The jointings give satisfactory services against steam also.

7) CHAMPION 60 ACID:

7

CREAM / LIGHT GREY

This is a specialised asbestos fibre jointing sheet which is intimately bonded with an acid resisting compound to withstand the corrosive action of acids and chemcials. Recommended for use against hot concentrated organic, inorganic and mineral acids inculding hydrochloric, sulphuric (oleum) and nitric acids, under service conditions of temperature and pressure commonly encountered in chemical industries.

NON ASBESTOS JOINING SHEET:

1) AF 111

11

A cost effective product manufactured from ecofriendly natural cellulosic fibres bonded with suitable mix of elastomers.

Colour : Red & Green.

General purpose gasketing material suitable for use with Oils, Solvent, Gases, Water, L.P.Steam and most dilute acids and alkalies (low service conditions).

2) AF 120 :

12

A compressed synthetic Aramid fibre joining sheet bonded with elastomers to create a matrix of stability.

Colour : Green

Also available with wire gauze reinforcement and antistick coating.

Suitable for light industrial applications

3) AF 139:

13

A high quality joining sheet based on synthetic Aramid fibres bonded with NBR elastomer.

Colour : Orange

Also available with wire gauze reinforcement and antistick coating.

Suitable for use in applications involving hydrocarbons such as oils and solvents, steam, glycols and aqueous solutions.

4) AF 154 :

14

A superior performance compressed joining sheet incorporating a blend of special heat resisting Aramid fibers with a high quality nitrile elastomer binder.

Colour : Yellow

Also available with wire gauze reinforcement and antistick coating.

Suitable for use with Oils, Solvents, Gases, Steam, Dilute Acid & alkalies.

6)AF 159:

15

A Premium grade joining sheet based on special synthetic Aramid fibres bonded with nitrile elastomer.

Colour : Grey

Also available with wire gauze reinforcement and antistick coating.

A universal grade suitable for many industrial sealing applications.

7) AF 160:

16

A top quality acid resistant compressed synthetic Aramid fibre joining sheet bonded with special binders.

Colour : Cream

Available with antistick coating.

Acid resistant grade. Recommended for use against hot, Concentrated Organic/inorganic.mineral acids.